Panasonic FZ-G1 Series Operating Instructions Manual page 29

Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
13 When Ending process screen is displayed, touch [OK] to turn off the
computer.
14 Turn on the computer.
l If the password is requested, enter the Supervisor Password.
15 Perform the "First-time Operation" (è page 20).
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
n Using Recovery Disc
Use the Recovery Disc in the following conditions.
Ÿ You have forgotten the administrator password.
Ÿ Installation is not complete. The recovery partition in the flash memory may be broken.
<Only for Windows 7 downgrade model>
Ÿ
To change OS from Windows 7 to Windows 8, or vice versa.
NOTE
To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery
l
partition in the flash memory.
Preparation
l Prepare the following items:
• Recovery Disc (è
• USB DVD drive (optional) (refer to recent catalogs and other sources for information
about the products available)
l Remove all peripherals (except for the USB DVD drive).
l Connect the AC adaptor and do not remove it until installation is complete.
NOTE
l You can use the following buttons instead of the keyboard.
: F2 key (Default setting)
: ↓ key
: ↑ key
: Enter key
: Tab key
1 Connect the DVD drive to the USB port.
2 Start the Setup Utility.
A Display "Charm" and touch
B Touch [Restart now] under "Advanced startup".
C Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
Turn on the computer, and touch top left of the screen while [Panasonic] boot screen is
displayed.
l If the [Panasonic] boot screen is not displayed, turn on the computer while touching top
left of the screen.
Reference Manual "Recovery Disc Creation Utility")
- [Change PC settings] - [General].
29