Pentax Optio W80 Manual page 95

e_kb485.book Page 94 Friday, July 3, 2009 9:18 AM
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter release
button pressed.
• The flash does not discharge in j and c modes.
• j and c cannot be selected in 9 (Green), b (Auto Picture), A
(Night Scene), C (Movie),
3
N (Frame Composite), X (Digital Wide) or F (Digital Panorama)
modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200 and higher.
• With j, you can continue shooting until the memory capacity of the
SD Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f in Burst Shooting. When
the shooting mode is set to
pixels is set to V (1280×960).
94
(Underwater Movie), S (Fireworks),
(Report), the number of recorded