Pentax Optio W80 Manual page 100

e_kb485.book Page 99 Friday, July 3, 2009 9:18 AM
3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90º counterclockwise and
align your first picture.
When the camera recognizes a person's
face, the Face Recognition function is
activated and the face recognition frame
appears (p.73).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat steps 4 and 5 to take the second
image. This combines first and second images.
The stitched first and second image appears on the display temporarily
(Instant Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Recognition function is activated (p.73), it works only
when taking the first shot.
• The number of recorded pixels for images captured with X mode is
fixed at f (2592×1944).
• (1cm Macro) is unavailable in X mode.
38 38 38
1
2 2
OK Exit Exit
3
99