Pentax Optio W80 Manual page 39

e_kb485.book Page 38 Friday, July 3, 2009 9:18 AM
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the
AC adapter to the camera are inserted securely. Data may be lost if
either becomes disconnected while data is being recorded on the SD
1
Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read "About the Battery Charger and the AC Adapter" (p.3)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter
kit K-AC78 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright
on the table because the cord from the DC coupler comes out of the
bottom of the camera.
• Do not use excessive force when sliding the battery/card/terminal
cover open and closed because the waterproof packing may peel off.
If the packing is not in the correct position, the camera will not be
waterproof.
38