Various Protections - Fujitsu ASYA07LCC Service Instruction

21. VARIOUS PROTECTIONS

(1). DISCHARGE GAS TEMPERATURE OVERRISE PREVENSION CONTROL
The discharge gas thermosensor (discharge thermistor : Outdoor side) will detect discharge gas
temperature.
When the discharge temperature becomes higher than Temperature ,the compressor frequency
is decreased 20 Hz, and it continues to decrease the frequency for 20 Hz every 120 seconds until
the temperature becomes lower than Temperature .
When the discharge temperature becomes lower than Temperature ,the control of the control of the
compressor frequency is released.
When the discharge temperature becomes higher than Temperature
and the indoor unit LED starts blinking.
(Table 17 : Discharge Temperature Over Rise Prevension Control / Release Temperature)
ASYA07/09/12/14/18LCC
ASYB09/12LDC
(2). CURRENT RELEASE CONTROL
The compressor frequency is controlled so that the outdoor unit input current does not exceeds
the current limit velue that was set up with the outdoor temperature.
The compressor frequency returns to the designated frequency of the indoor unit at the time
when the frequency becomes lower than the release value.
(Table 18 : Current Release Operation Value / Release Value)
[ Heating ]
OT : Outdoor Temperature
07/09LCC, 09LDC
OT (Control / Release)
6.5A / 6.0A
17°C
8.0A / 7.5A
12°C
8.0A / 7.5A
5°C
8.0A / 7.5A
[ Cooling / Dry ]
07/09LCC, 09LDC
OT (Control / Release)
3.5A / 3.0A
46°C
4.0A / 3.5A
40°C
5.5A / 5.0A
Temperature Temperature
104°C 101°C
104°C 101°C
12LCC, 12LDC
OT (Control / Release)
6.5A / 6.0A
17°C
8.0A / 7.5A
12°C
8.5A / 8.0A
5°C
9.5A / 9.0A
OT : Outdoor Temperature
12LCC, 12LDC
OT (Control / Release)
4.0A / 3.5A
46°C
5.0A / 4.5A
40°C
6.5A / 6.0A
Temperature
110°C
110°C
14/18LCC
OT (Control / Release)
7.0A / 6.5A
17°C
9.0A / 8.5A
12°C
10.5A / 10.0A
5°C
13.0A / 12.5A
14/18LCC
OT (Control / Release)
4.5A / 4.0A
46°C
6.0A / 5.5A
40°C
8.5A / 8.0A
05-17
,the compressor is stopped