Dell OptiPlex 3040M Series Owner's Manual page 35

Option
Trusted Execution
Table 15. Wireless
Option
Wireless Device Enable
Table 16. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Data Wipe
BIOS recovery
Table 17. Cloud Desktop
Option
Server Lookup Method
Server Name
Server IP Address
Server port
Client Address Method
Client IP address
Description
This option specifies whether a Measured Virtual Machine Monitor (MVMM)
can utilize the additional hardware capabilities provided by the Intel Trusted
Execution Technology. This option is disabled by default.
Description
Allows you to enable or disable the internal wireless devices. All the options
are enabled by default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This
option is not set by default.
Controls the SERR message mechanism. This option is not set by default.
Some graphics cards require that the SERR message mechanism be
disabled.
Allows you to control flashing of the system firmware to the previous
versions. This option is enabled by default.
NOTE: If this option is not selected, the flashing of the system firmware
to the previous versions is blocked.
Allows you to securely erase the data from all the available internal storages,
such as HDD, SSD, mSATA, and eMMC. This option is disabled by default.
Allows you to recover the corrupted BIOS conditions from the recovery files
on the primary hard drive or an external USB key.
Description
Allows you to specify how the cloud desktop software will lookup server
addresses.
• Static
• DNS (Default)
Allows you to specify the name of the server
Specifies the primary static IP address of the cloud desktop server. The
default IP address is 255.255.255.255
Specifies the primary port of the cloud desktop. The default setting is 06910.
Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Specifies the static IP address of the client. The default IP address is
255.255.255.255
35