Removing The Memory Module; Installing The Memory Module; Removing The Heat Sink - Dell OptiPlex 3040M Series Owner's Manual

Removing the memory module

1. Follow the procedure in
2. Remove the:
a. cover
b. system fan
3. Pull the securing clips from the memory module until the memory module pops up.
4. Remove the memory module from the socket on the system board.

Installing the memory module

1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket and press it until it clicks into place.
3. Install the:
a. system fan
b. cover
4. Follow the procedure in

Removing the heat sink

1. Follow the procedure in
2. Remove the:
a. cover
b. hard drive assembly
c. system fan
3. To remove the heat sink:
a. Loosen the captive screws that secure the heat sink to the computer [1].
b. Lift the heat sink away from the computer [2].
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
13