Playing Back Video Clips; Adjusting The Playback Volume; Slideshow - BenQ E1420 Series User Manual

Table of Contents

Advertisement

28 Playback mode

Playing back video clips

View recorded video clips in the playback mode.
To view a video clip:
1. Slide the mode switch to
2. Press
or
to move to the video clip you want to view.
3. Start playing back.
• Press
to start playing the video clip.
• Press
to stop the video clip, or press
• During video playback, press
• While pausing video playback, you can press the shutter to capture the video frame as
a still image in the VGA format.
• While pausing video playback, you can view the video frame by frame. Press
forward one frame, or press
forward frame by frame continuously, or press and hold
continuously.

Adjusting the playback volume

Increase or decrease the volume of video clips, audio clips, or voice memos.
To adjust the playback volume:
1. Turn the power on, and set the camera to the playback mode.
2. Press
or
to select a video clip, audio clip, or voice memo that you want to playback.
3. Adjust the volume.
• Slide to
to increase the volume.
• Slide to
to decrease the volume.
The volume can be set during playback, but not during rewind, fast forward, or pause.

Slideshow

Sets the time interval for presenting a series of captured image and video files (first frame
only).
To play a slideshow:
1. Slide the mode switch to
2. Press
>
3. Change the slideshow settings.
• Use the four-way control to set one of the following slideshow effects:
Applies a transition effect from left to right.
Applies a transition effect from upper-left side to lower-right side.
.
to fast forward or press
to rewind one frame. Press and hold
.
> Slideshow >
to pause it. Press
or
.
again to resume.
to rewind.
to fast
to fast
to rewind frame by frame

Advertisement

Table of Contents
loading

This manual is also suitable for:

E1430 series

Table of Contents