Meyer Sound LEO-M Operating Instructions Manual page 16

CHAPTER 4: QUICKFLY RIGGING
Rigging Example, LEO-M Array with MICA Downfill and Pull-Up
MVP Motor Vee Plate
Attached to rear center
of grid with two motors
to adjust the horizontal
aim of the array
RPP-LEO-M
Rear Pull-Up Plate
Helps assemble large
arrays with wide splay
angles by providing pull-
up (with a motor) to
expand the array's splay
angles during installation
so the blue locking pins
can be more easily
inserted
PBF-LEO-M
Pull-Back Frame
Attached to transition
frame to provide pull-
back for extreme array
downtilt; can also be used
for pull-up to expand the
array's splay angles
during installation so the
blue locking pins can be
more easily inserted
(3) MICAs
Downfill coverage
16
MTG-LEO-M Top Grid
Oriented for maximum
array downtilt with three
pick-up points and four
motors
(12) LEO-Ms
Primary array
coverage
MTF-LEO/MICA
Transition Frame
Transitions from last LEO-M
to first MICA (for downfill); is
also required when using the
PBF-LEO-M pull-back frame
(with or without MICAs)
The MTF-LEO/LYON transi-
tion frame is also available
for flying LYONs below
LEO-Ms