Table of Contents
Advertisement
DIASSEMBLY INSTRUCTIONS
11
90 。
TOP FRAME
90 。
HOLDER
1. Disassemble Harness by unscrewing 2
Earth screws and disassemble
connectors.
2. Disassemble Main PWB from TOP
FRAME by rotating after unscrewing 2
screws.
3. Disassemble Holder and Spring by
pressing down and pulling the low hook
of holder.
Note
Motor
Small Gap
30
Be carefal of the
direction of Spring
Large Gap
hanger during
assemble to prevent
possible noise.
Holder
Hide quick links:
Advertisement
Table of Contents
