Table of Contents
Advertisement
DIASSEMBLY INSTRUCTIONS
11
TOP PLATE
DRAWER
1. Disassemble top plate by unscrewing 2
screws on the rear of the dryer.
2. Disassemble Safety Cover by
unscrewing 2 screws on the top of the
dryer.
3. After pulling drawer assembly out,
unscrew 1 screw.
4. Untie Keeping wire and then
connector(2ea) disassemble from
MAIN PCB
Note
1. Assemble wires at the HOOK surely when you
reassemble.
27
Hide quick links:
Advertisement
Table of Contents
