Step 6 Position Water Line And House Wiring; Step 7 Insert Drain Hose Through Cabinet; Step 8 Slide Dishwasher Partially Into Cabinet - GE GSD1807 Installation Instructions Manual

Built-in dishwasher
Hide thumbs Also See for GSD1807:
Table of Contents

Advertisement

STEP 6 POSITION WATER LINE
AND HOUSE WIRING
• Position water supply line and house wiring on the floor of
the opening to avoid interference with base of dishwasher
and components under dishwasher.
Water
Line
Figure M
STEP 7 INSERT DRAIN HOSE
THROUGH CABINET
• Upright the dishwasher and position in front of the opening.
Insert drain hose into cabinet wall hole.
If a power cord is used, guide the end through a separate
hole.
Insulation
Blanket
Figure N
TIP: Position water line and house wiring on the floor
to avoid interference with base of dishwasher.
Installation Instructions
4"
6"
House
Wiring
Maximum
Drain Hose
Length 10'
Water
Line
Drain
Hose
House
Wiring
Power Cord
(If Used)
STEP 8 SLIDE DISHWASHER
PARTIALLY INTO CABINET
DO NOT PUSH AGAINST FRONT PANEL WITH KNEES.
DAMAGE WILL OCCUR.
• Slide dishwasher into the opening a few inches at a time.
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
• As you proceed, pull the drain hose through the
opening under the sink. Stop pushing when the dishwasher is a
few inches forward of adjacent cabinetry.
• Make sure drain hose is not kinked under the dishwasher and
there is no interference with the water
line and wiring or any other component.
7
Figure O

Advertisement

Table of Contents
loading

Table of Contents