Reading Messages; Turning On The Backlight - Motorola RSVP User Manual

TURNING YOUR PAGER ON
Press W to turn your pager on. Your pager will alert indicating
that it is on.
The time of day and the "Alert Mode" indicator, silent ( [ ) or
audible ( D ), is displayed.

READING MESSAGES

The RSVP pager can receive up to eight 20-character mes-
sages. When a message is received, the pager alerts with an
audible or a vibrate alert, and a flashing alert indication.
Press any button to stop the alert. Display your message as
follows:
1. Press the W button to display your message.
Messages that contain more than 12 characters are contin-
ued on a second screen. The ( B ) indicator means a second
screen exists.
2. Press W to advance to the second screen. If not selected,
the second screen is automatically displayed after one
minute.
The last screen of your message displays the message slot
number and the time the message was received.
If a message is left unread, the pager emits a reminder alert
every two minutes, and the number of unread messages is
displayed.
3. The pager automatically returns to the main status display
after approximately eight seconds.

TURNING ON THE BACKLIGHT

In low light conditions, press
Press again to turn off backlight or allow it to turn off auto-
matically.
RESET
Pressing the button twice always resets the pager back to
the main display menu.
6
on the display backlight.