INTRODUCTION Your RSVP Numeric Display Pager turns any Motorola Micro- TAC™ or retail pocket personal cellular telephone into the ultimate personal communicator. RSVP also features a removable and rechargeable, ultra-thin, Nickel-Metal- Hydride cellular battery. RSVP slides onto the back of your phone in place of the existing battery unit, providing the control and convenience of a pager and a phone in a single unit.
Page 3
PROCEDURE FOR CONNECTING YOUR NEW RSVP PAGER TO YOUR CELLULAR PHONE Remove battery from any Motorola MicroTAC or retail pocket personal cellular telephone in the following manner: Press and hold down battery release Lift battery off cellular phone Slide battery...
Page 4
Note: Ensure the Nickel-Metal-Hydride battery is fully charged and installed in the RSVP pager before performing this procedure. Install your RSVP pager in place of the cellular phone battery in the following manner: Set RSVP onto mounting slide approximately one inch below...
Page 5
CONTROLS AND DISPLAY INDICATORS The locations and descriptions of the RSVP pager controls and display indicators are shown below: Display On/Read/ Select Button Pager Display: Alarm Indicator 10:47a Alert Mode Time Indicator of Day 12:48p Message Slot Number Alert/Backlight Indicator...
TURNING YOUR PAGER ON Press W to turn your pager on. Your pager will alert indicating that it is on. The time of day and the “Alert Mode” indicator, silent ( [ ) or audible ( D ), is displayed.
With the pager off, the clock is shown on the display, but not the “Alert Mode” indicator. SETTING THE ALARM Your pager’s alarm can be set to alert you to a certain time of day. Set the alarm as follows: 1. Press X until “SET ALARM?” appears on your display.
Your existing cellular charger may be used to charge your cellular/pager unit, or with the optional adaptor, you may also charge a spare battery in your cellular charger.
BATTERY REPLACEMENT Remove RSVP from your cellular telephone and replace the RSVP battery as shown below: Press release then slide pager downward away from antenna Turn pager over, insert tip of ball pen under release and pry up on release, then lift...
Refer to the charger manufacturer’s instructions for specific use of your charger. PROPER CARE The RSVP pager is durable, reliable, and can provide many years of dependable service, but it is a precision electronic product. Water and moisture, excessive heat, and extreme shock may cause damage to the pager.
PATENT INFORMATION This Motorola product is manufactured under one or more Motorola U. S. patents. A listing of these patents is provided on the inside surface of the battery compartment. Other U. S. patents covering this product are pending.