Stihl FS 55 Instruction Manual page 30

Starting
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
:
While holding both levers in this
position, move the slide control to
START and hold it there.
: Now release the throttle trigger,
slide control and throttle trigger
interlock in that order. This is the
starting throttle poistion.
:
Go to "All versions".
FS 55
3 1 2
5
7 6
Version with loop handle
Controls
Stop switch (1) with positions:
# - normal run position (2) and
O - Stop (3)
Throttle trigger interlock (4).
Throttle trigger (5) with
tongue (6) and notch (7).
4
Starting
: Move stop switch to position #
: Hold down throttle trigger interlock
and squeeze the throttle trigger until
the notch on the tongue (6)
engages the housing.
:
Release the throttle trigger, tongue
and throttle trigger interlock in that
order. This is the starting throttle
position.
:
Go to "All versions".
English / USA
6
29