Changing The Bluetooth Settings - JVC KW-XR810 Instructions Manual

Changing the Bluetooth settings

1
[Hold]
2
] <Bluetooth> ] <Setting>
Setting item
Auto Connect • Last
• Off
Auto Answer • On
• Off
Message • On
Notice
• Off
MIC Setting —
NR/EC Mode • On
• Off
Ringing Tone • In Unit
• In Phone
3
• To return to the previous menu, press
T/P BACK.
• To exit from the menu, press DISP or MENU.
Selectable setting, [
: The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
: The unit does not connect the Bluetooth device automatically.
Connect the device manually. (
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the
calls manually. ( 19)
: The unit informs you of the arrival of a SMS by ringing and
displaying "Received Message."
: The unit does not inform you of the arrival of a SMS.
: Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
: The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
: Cancels.
: The unit rings to alert you when a call/SMS comes in.
Call: Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message: Select your preferred ring tone when a SMS comes
in. [ Tone 1/2/3 ]
: The unit rings (using the connected phones' ring tone) to alert
you when a call/SMS comes in. (The connected mobile phone
rings if it does not support this feature.)
] Select a setting item, then repeat
the procedure to change the setting
accordingly.
]
Initial: Underlined
17)
ENGLISH 21