BENETEAU 461 Owner's Manual page 11

TOOL KIT
A basic kit should consist of:
Wrenches - adjustable, Metric and SAE open end, box, socket
•
Hammers - large and small
•
Knife - with marlinespike
•
Screwdrivers - large and small, standard and Phillips
•
Pliers - regular, cutting and needle nose, vise grips
•
Wire cutter - capable of cutting standing rigging
•
Hacksaw - with spare blades
•
SPARE PARTS
A basic kit should consist of the following:
Standing and Running Rigging: Turnbuckles, monel seizing wire, clevis
•
and cotter pins, blocks, extra line, rigging tape, duct tape.
Fasteners: Assortment of stainless steel screws, nuts, bolts, and washers
•
Hose clamps.
•
Electrical: Electrical tape, wire, crimps on lugs, spare navigation light
•
bulbs.
Lubricating supplies: WD-40 and silicone grease.
•
Engine: Check engine manual for spare parts, engine oil and transmission
•
fluid recommendations.
Sails: Sail repair kit and sail slides.
•
BENETEAU 461
03/02/07
9:24
rev 01
Page 11 of 70