Installing The Power Connector Port; Removing The Wlan Card - Dell Latitude E7470 Owner's Manual

Installing the power connector port

1. Insert the power connector port into the slot on the computer.
2. Place the metal bracket on the power connector port and tighten the screw to secure the power
connector port to the computer.
3. Route the power connector port cable to the routing channels and connect the power connector
port cable to the connector on the system board.
4. Install the:
a. battery
b. base cover
5. Follow the procedure in

Removing the WLAN card

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the WLAN card:
a. Remove the screw that secures the metal bracket to the WLAN card [1].
b. Remove the metal bracket [2].
c. Disconnect the WLAN cables from the connectors on the WLAN card [3].
d. Unroute the WLAN cables from the routing channel.
e. Remove the WLAN card from the computer [4].
18
After working inside your
Before working inside your
computer.
computer.