Removing The Heat Sink Assembly; Installing The Heat Sink Assembly; Removing The Solid State Drive (Ssd) - Dell Latitude E7470 Owner's Manual

Removing the heat sink assembly

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the heat sink:
a. Disconnect the fan cable [1].
b. Remove the screws that secure the heat sink assembly to the system board [2, 3, 4, 5, 6].
c. Lift the heat sink assembly from the system board [7].

Installing the heat sink assembly

1. Place the heat sink assembly on the system board and align it with the screw holders.
2. Tighten the screws to secure the heat sink assembly to the system board.
3. Connect the fan cable to the connector on the system board.
4. Install the:
a. battery
b. base cover
5. Follow the procedure in

Removing the Solid State Drive (SSD)

1. Follow the procedure in
2. Remove the:
Before working inside your
After working inside your
Before working inside your
computer.
computer.
computer.
11