Assign Irq For Vga; Assign Irq For Usb - MSI MICRO NLX BX4 User Manual

Table of Contents

CHAPTER 3

IRQ-15 assigned to : PCI/ISA PnP

DMA-0 assigned to : PCI/ISA PnP

DMA-1 assigned to : PCI/ISA PnP

DMA-3 assigned to : PCI/ISA PnP

DMA-5 assigned to : PCI/ISA PnP

DMA-6 assigned to : PCI/ISA PnP

DMA-7 assigned to : PCI/ISA PnP

The above settings will be shown on the screen only if "Manual" is

chosen for the Resources Controlled By function.

Legacy is the term which signifies that a resource is assigned to the

ISA Bus and provides for non PnP ISA add-on card. PCI/ISA PnP signifies

that a resource is assigned to the PCI Bus or provides for ISA PnP add-on

cards and peripherals.

Assign IRQ for VGA

Lets the user choose which IRQ to assign for VGA card.

Set to Enabled when USB port will be used. Set to Disable if the USB

port will not be used.

Used MEM base addr

Lets the user choose the Legacy ISA addr. The settings are NA#,

C800, CC00, D000, D400, D800 OR DC00.

Used MEM base addr

Lets the user choose the Legacy ISA addr. memory length. The

settings are 8K, 16K, 32K, or 64K.

AWARD

3-25

BIOS SETUP

Table of Contents