Recording to a tape (continued)
Recording a CD by specifying
— Program Edit
Load CDs and a recordable tape.
Program CD and tracks following step 1
to 6 in "Programming the CD tracks" on
Press CD SYNC.
Deck B stands by for recording.
Press DIRECTION repeatedly to select
g to record on one side.
Select j (or RELAY) to record on
To check the required tape length for recording a CD,
press EDIT after you have loaded a CD and switched
function to CD. The required tape length for the
currently selected CD appears, followed by the total
playing time for side A and side B respectively (Tape
• You cannot use Tape Select Edit for discs
containing over 20 tracks.
• You cannot use this function when Program Play
mode has been set. After clearing the entire
program, follow the above procedure.
To timer-record, you must preset the radio
station (see "Presetting radio stations" on page
12) and set the clock (see "Setting the clock"
on page 9) beforehand.
Tune in the preset radio station (see
"Listening to the radio" on page 13).
Press c/CLOCK SET.
Press R/r repeatedly to select "REC
SET," then press ENTER.
"ON" appears and the hour indication
flashes in the display.
Set the time to start recording.
Press R/r to set the hour, then press ENTER.
The minute indication starts flashing.
Press R/r to set the minute, then press
Set the time to stop recording following
the above procedure.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., "TUNER FM 5"), then the original
Insert a recordable tape into deck B.