Loading a tape
Press A EJECT Z or Z B EJECT.
Insert a tape in deck A or B.
Insert with the side
you want to play/
Playing a tape
You can use TYPE I (normal) tape.
Load a recorded tape.
Press DIRECTION repeatedly to select
g to play one side. Select j to play
both sides. Select RELAY (Relay Play)*
to play both decks in succession.
Press H (or TAPE A/TAPE B nN on
Press h (or TAPE A/TAPE B nN on
the remote again) to play the reverse side.
The tape starts playing.
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
(deck B only)
Press again to resume play.
Press M> or .m (or
press M or m on the remote)
in stop mode.
Press .m or M> (or
press m or M on the remote)
in stop mode.
Press A EJECT Z (or Z B
EJECT ) in stop mode.
The deck stops automatically after repeating the
sequence five times.
Searching for the beginning of a
During playback, press .m or M>
(or press . or > on the remote)
repeatedly for the number of songs you want to
skip forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1 to 9)
Example: searching forward 2 songs
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
Note on the tape decks
Do not press A EJECT Z or Z B EJECT while
playing a tape, otherwise the tape could be