Press DISC 1 to 5 or HX
Switch to CD function
(or CD N on the remote)
from another source
Press REPEAT during
playback until "REPEAT"
or "REPEAT1" appears.
REPEAT*: For all the
tracks on the CD up to five
REPEAT1: For a single
To cancel playing
repeatedly, press REPEAT
until "REPEAT" or
Remove the CD
Press PUSH OPEN.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
* You cannot select "REPEAT" and "ALL DISCS
SHUFFLE" at the same time.
You can change the CD in the loading position during
playback of the CD in the playing position.
Programming the CD
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
Press FUNCTION repeatedly until "CD"
appears, then load a CD.
Press PLAY MODE repeatedly until
Press DISC SKIP to select a CD.
Turn . AMS > until the track you
Press PLAY MODE once.
The track is programmed. First the
programmed playing order and "STEP"
appear, then the total playing time appears.
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
Cancel Program Play
PLAY MODE repeatedly
until "PROGRAM," "ALL
DISCS SHUFFLE" or "1
Clear a track from
CLEAR on the remote in
Add a track to the end
Perform step 3 to 5.
of the program in stop
• The program you made remains in the CD player
after it has been played back. Press HX to play
the same program again.
• "--.--" appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.