Download  Print this page

Recording To A Tape; Cd Synchro Recording/high Speed; Program Edit - Sony LBT-XGR90AV Operating Instructions Manual

Hide thumbs

Advertisement

Recording to a tape

–– CD Synchro Recording/High Speed Dubbing/Recording Manually/

Program Edit

You can record from a CD, tape (or connected components) or radio. You can use TYPE I (normal)
tape. The recording level is adjusted automatically.
Recording from a CD
Steps
(CD Synchro Recording)
1
Insert a recordable tape into deck B.
Insert the CD you want to
2
record.
Press CD SYNC.
3
DECK B stands by for recording.
When you want to record on the reverse side, press h.
Press DIRECTION repeatedly to select g to record on one side.
4
Select j (or RELAY) to record on both sides.
Press X.
5
Recording starts.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the tape:
If you set the direction to j when the tapes you
use have different lengths, the tapes in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
Recording from a tape
(High-Speed Dubbing)
Insert the tape you want to
record into deck A.
Press H SPEED DUB.
• To record with the surround effect, press DSP so
that "SUR
The equalizer settings will not be recorded.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording Manually
Press FUNCTION or
TUNER/BAND
repeatedly until the
source or band you
want to record appears,
and then load the CD/
tape (or other music
source), or tune to the
station you want to
record.
Press z REC.
Press X, then start
playing the source to
be recorded.
" appears.
continued
GB
15

Advertisement

Table of Contents

   Related Manuals for Sony LBT-XGR90AV

Comments to this Manuals

Symbols: 0
Latest comments: