Advertisement
Starting You~~~~VQRTEC'~
4300 Engine
1. Witho.ut pushing the: amilerator pedal, turn your
ignition- key to START. When the-engine starts, let
go of
the. key,
The idle speed w
go-down as your
engine
gets
warm.
NOTICE:
Holding your key :in
START for
longer khan
15 .sec.onds at- a lime will cause. your battery-to be
draihed:-much so6ner. And the
exc4?ssiVe
heat can
damage your starter motor.
2.
If
it doe.sn't
start right away? hold your key in
START. If
it
doe'sh't start in 10 seconds, push ,the
accelerator p:edal .all
t k w a y
down for five.
more
seconds,
01-
.until it starts.
3.
If
your engine stili wun't .start
(or
sta?s but
then
stops)., wait 15 seca,nds and start
over..
When .the engine starts,
let go of the key and the
accelerator pedal.
NOTICE:
Your
engine is designed to work with t.he
electronics in your vehicle. If you .add electpica1
parts or :accessories, you
could
change the way
the engine operates, B-efore adding electrical
equipment, check with
y0u.r
dealer.
If
you dan't,
your engine might not perform properly.
If-you
ever have to have your vehicle. towed, see
the part of this manual that tells- how
to do it:
without damaging
your
vehicle.
See "Towing,
Your
Vehile"
in
the Index.
Advertisement
