Advertisement
Then, without shutting off the engine, follow these steps:
3.
4.
1. Flip the handle up and then pull out the dipstick and
2. Push it back in all the way, wait three seconds and
wipe it with a clean rag or paper towel.
then pull it back out again,
Check both sides of the dipstick, and read the lower
level. The fluid level must.be in the COLD area €or a
cold check or in the ROT area or.cross-hatched area
for a hot check.
I f the fluid level is in the acceptable range, push the
dipstick back in all the way; then flip the handle
down to .lock thedipstick. in place.
Advertisement
