Advertisement
'Easy Entry Seat (Extended Cab)
The right front bucket or split-bench seat of your vehicle
.makes it easy to- get -in and out of the rear vehicle area.
a
Tilt the right front seatback completely forward and
the whole seat will slide forward.
Move the right front seatback to its original position
after- someone gets into the
.rea- seat
area. Then. move
the seat rearward until it locks.
If an easy entry right front seat isn't
iocked, it
can move. In a sudden stop or crash, the person.
sitting there could be injured. After
you've used
it;
be sure to push rearward on an easy entry seat
to be sure it
i s
locked.
.@
Tilt the seatback completely forward again to get out.
Jump Seat (Extended Cab Models)
Your
extended cab pickup
bas
a jurnp seat.in the
rear area.
TO fold the jump seat down, pul1:Cfown on the handle -on
the bottom of the -seat until the se.at is in place, then
move:the seatback 'to a vertical position. To store the
seat, fold the seatback down on the cushion, then push
the entire seat up until it is flush
with
the tfirq panels.
Don't let the- safety belts be damaged by the hinges'or.
the latches. Safety bellts should be folded
tind
stored
between
the seat cushion. and seatback.
1-6
-
Advertisement
