Setting The Display Contrast; Setting The Time And Date - GE 29582 User Manual

Setting the Display Contrast

This setting allows you to adjust the display contrast for easier readability.
1. If you recently adjusted the Local Area Code menu, skip to Step 2. If you haven't
adjusted any other setting, press and release the MENU button until the screen displays
SET CONTRAST.
2. Use the SKIP or REPEAT button to select the desired setting (1-5).
3. When finished, press the MENU button to confirm and go to the next setting.
NOTE: To skip to the next setting, press the MENU button. To exit setup,
press the FLASH/EXIT button.

Setting the Time and Date

NOTE: If you have subscribed to the Caller ID display feature from your
telephone company, the telephone company sends the time and date
with the Caller ID information. The unit automatically sets the time
and date when the first call is received.
Hour
1. If you just adjusted the Display Contrast menu, skip to Step 2. If you haven't adjusted
any other setting, press and release the MENU button until the screen displays SET
TIME/DATE.
2. The hour digits flashing indicates that the unit is ready to accept entry. Use the keypad
numbers to enter a two digit number to set the hour.
3. When finished, the cursor moves to the Minute field. Now you're ready to enter the
minutes.
Minutes
1. Use the keypad numbers to enter a two digit number to set the minutes.
2. When finished, the cursor moves to the AM or PM field. Now you're ready to enter the
time of day, AM or PM.
1