Setting The Display Setting The Contrast Setting The Dial M Exiting Set U P; Caller Id Features; Summary Screen; Ode - GE 29481G1 User Manual

S D
ETTING THE
This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.
1. Press the OPTIONS button. OPTIONS or shows in the display.
2. Press either or button until T/P DIAL MODE shows in the display.
3. Press OPTIONS again to show the current dial mode. The default is Tone.
4. To change the dial mode, press the or button. The display will
alternate between the two modes.
5. Press the OPTIONS button again to store the setting and return to the
T/P DIAL MODE display.
E S U
XITING ET
To exit the setup mode after your changes are made, select the EXIT
SETUP menu and press the OPTIONS button.
NOTE: The phone will exit Set Up after 20 seconds if no buttons are pressed.
REMINDER: The time and date are programmed automatically when the first
Caller ID record is successfully received after set up.
C ID F
ALLER
S S
UMMARY CREEN
The Summary Screen shows the current time, date, and number of new
calls to review. It is displayed until any button is pressed.
NOTE: The number of new calls is displayed until all new calls have
been reviewed.
R
ECEIVING AND
This unit receives and displays information transmitted by your local
phone company. This information can include the phone number, date, and
time; or the name, phone number, date, and time. The unit can store up to
18
M
IAL

ODE

P
EATURES
S C
TORING

ALLS