Blind Spot Information (Bsi); Parking Sensor System - Acura MDX 2016 Owner's Manual

DRIVING

Blind Spot Information (BSI)*

Alerts you to a detected vehicle in your left or right blind spot while driving 20 mph
(32 km/h) or higher.
When a vehicle is detected in your blind spot, the
blind spot indicator turns on and stays lit until the
area is clear.
When your turn signal is on and a vehicle is
detected, the blind spot indicator blinks and a
beep sounds until the area is clear or the turn
signal is off.
Changing Settings
Change the alert type, or turn the system on or off. Use the interface dial to make
and enter selections.
1. Press SeTTINGS.
2. Select vehicle Settings.
3. Select Blind Spot Info.
4. Select an alert type, or off.
5. Press BACK to exit the menu.
WARNING
Failure to visually confirm that it is safe to change lanes before doing so may
result in a crash and serious injury or death. Do not rely only on the blind
spot information system when changing lanes.
Always look in your mirrors, to either side of your vehicle, and behind you for
other vehicles before changing lanes.
Important Safety Reminder
Like all assistance systems, BSI has limitations. over-reliance on BSI may result in a
collision. The system is for your convenience only.
108 |

Parking Sensor System*

When the system senses an object when you are parking or backing up, an indicator
appears on the upper display and a series of beeps will sound. As you get closer to
the object, the beep rate increases.
Comes on
Blinks
Turning the System On or Off
Press the parking sensor button. A green indicator
light appears on the button when the system is on.
*if equipped
DRIVING
Indicators appear when the
sensor device detects an
obstacle.
Indicator
*if equipped
| 109