Condition Indicators; On/Off Indicators - Acura MDX 2016 Owner's Manual

INSTRUMENT PANEL

Condition Indicators

These indicators may require you to perform an action.
Parking brake
U.S.
release the parking brake before driving. You will hear a beep if you drive
with it not fully released.
Canada
Seat belt reminder
Make sure seat belts are fastened for you and all passengers. The indicator
blinks and beeps sound continuously if you or your front passenger has not
fastened your seat belts when you begin driving. If the indicator remains on
after seat belts are fastened, see your dealer.
Low fuel
refuel as soon as possible. If the indicator blinks, there is a problem with
the fuel gauge. See your dealer.
Low tire pressure
Stop in a safe place, check tire pressures, and inflate tire(s) if necessary.
System message
When a condition or malfunction indicator comes on, a message also
appears on the multi-information display. Check the display for more
information.
Immobilizer
Your remote transmitter cannot be recognized by the vehicle. If the
indicator blinks, you may not be able to start the engine. Turn the vehicle
off, and then on again. If it continues to blink, there may be a problem with
the system. See your dealer.
26 |

On/Off Indicators

These indicators remind you when an item is on or off.
vSA off
vSA engaged (blinks)
CrUISe MAIN on
CRUISE CRUISE
MAIN CONTROL
CrUISe CoNTroL on
CRUISE CRUISE
MAIN CONTROL
Turn signals/hazards on
High beams on
exterior lights on
INSTRUMENT PANEL
Fog lights* on
FCW*/CMBS * off
TM
BSI* off
ACC* on
LKAS* on
Auto idle stop* on
Auto idle stop* off
*if equipped
| 27