Table of Contents
Advertisement
Chapter
06
Searching for and selecting a location
Searching for POIs by using
the data on the SD memory
card
Creating a customised POI is possible by
using the utility programme navgate FEEDS
which is available separately, on your PC. (nav-
gate FEEDS will be available on our website.)
Storing the customised POI properly and in-
serting the SD memory card enables the sys-
tem to use the data for searches.
1
Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
Display the "Destination Menu" screen.
2
= For details of the operations, refer to Screen
switching overview on page 18.
3
Touch [navgate FEEDS].
The "Select POI" screen appears.
4
Touch the item you want.
5
Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
38.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in "History".
p If no location is stored in Destination His-
tory, you cannot select [History]. (If you
perform a route calculation, you can select
[History].)
p "History" can store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
36
Engb
Display the "Destination Menu" screen.
1
= For details of the operations, refer to Screen
switching overview on page 18.
2
Touch [History].
3
Touch the entry you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
38.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
Display the "Destination Menu" screen.
1
= For details of the operations, refer to Screen
switching overview on page 18.
2
Touch [Coordinates].
3
Touch [East] or [West], and then enter
the longitude.
To enter W 50°1'5" for example, touch [West],
[0], [5], [0], [0], [1], [0] and [5].
Advertisement
Table of Contents
