Ejecting An Sd Memory Card - Pioneer AVIC-F200BT Operation Manual

Chapter
02 Basic operation
! Do not press the h button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1 Press the h button.
The "Monitor Setup" screen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.

Ejecting an SD memory card

1 Press the h button.
The "Monitor Setup" screen appears.
14
Engb
2 Touch [Eject SD].
The LCD panel opens.
p Touch [Yes] if the message indicating that
the flap opens after the navigation system
restarts appears.
The navigation system restarts, and then the
LCD panel opens.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
5 Press the h button.
The LCD panel closes.