Replacing The Wireless Wan Card - Lenovo ThinkPad Yoga 260 User Manual

Hide thumbs Also See for ThinkPad Yoga 260:
Table of Contents

Advertisement

5. Open the latches on both sides of the memory slot at the same time
module
2
. Save the removed memory module for future use.
6. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module
module downward until it snaps into place
the slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
7. Reinstall the base cover assembly. See "Replacing the base cover assembly" on page 123.
8. Turn the computer over again. Connect the ac power adapter and all cables to the computer.

Replacing the wireless WAN card

Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
Note: Some computer models are equipped with a wireless WAN card. The following information is only for
user-replaceable modules. For more information, see "FCC ID and IC Certification information" on page 8.
128
ThinkPad Yoga 260 User Guide
1
into the slot at an angle of about 20 degrees. Pivot the memory
2
. Ensure that the memory module is firmly installed in
1
, and then remove the memory

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents