Replacing The Base Cover Assembly - Lenovo ThinkPad Yoga 260 User Manual

2. Insert the card into the micro-SD-card slot. The card might stop before it is completely installed into the
card reader. Ensure that you insert the card firmly until you hear a click.
Note: Ensure that the metal contacts of the card are facing down and pointing toward the computer.

Replacing the base cover assembly

Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
Note: Depending on the model, your computer might look slightly different from the illustrations in this topic.
To replace the base cover assembly, do the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Disable the built-in battery. See "Disabling the built-in battery" on page 119.
3. Close the computer display and turn the computer over.
4. Loosen the screws that secure the base cover assembly.
.
Chapter 10 Replacing devices
123