Roland E-A7 Reference Manual page 49

The display changes to:
The top line shows the event type that can be edited
MSB" for example) and its location ("001:01:000"). You cannot
change the event type on this page.
3
Use the direct buttons to select the operation that you
want to execute.
Create Event
Select this function to add a new event to the selected track.
If the position for which you create a new event already contains
other events, the new event is added at the end of that group.
Parameter Value
Note, Control
Change, Pro-
gram Change,
Event
Pitch Bend,
Alteration
Mode
To Bar, To Beat,
See page 43.
To CPT
The selected event is inserted with a default value:
Note:
Note Number: 60 C4
On Velocity: 100
Gate Time: 60
Program Change: CC00 Bank Select MSB, value
CC32 Bank Select LSB, value
Program Change Number
messages are added automatically: you don't have to
worry about that.)
Pitch Bend: "0"
Alteration Mode: Nearest
Limit Low: Std
Limit High: Std
Obviously, you will then need to change the default settings
depending on the result you want to achieve.
[F5]
Press the (Exec) button to confirm your settings and add the
new event. The E-A7 returns to the
Erase Event
This function allows you to remove one or several events without
changing the positions of the remaining events.
Executing "Erase Event"
("CC00 Bank
Explanation
Allows you to specify the event type
you want to add.
Specifies the position where your
new event will be inserted.
"0"
"4"
"1" (The bank select
"Micro Edit" page.
erases the selected event(s).
Move Event
This function allows you to move one or several events.
1
Specify the move-destination for the selected event(s).
Parameter Value
To Bar, To Beat, To CPT See page 43.
2
Press the [F5] (Exec) button; the selected event(s) are
moved.
NOTE
5 If the position to which you move the selected event already
contains other events, the moved event is added at the end of
that group.
5 Events located at
"1-01-00"
Copy Event
This function allows you to copy one or several events. Use
Event" to insert a copy of those events at the desired position.
"Copy Event"
Executing
"Place Event"
Use the function described below to specify the
paste-destination for the copied event(s).
Place Event
This function is only available if the Style Composer's clipboard
already contains events that you copied using
1
Specify the paste-destination for the selected event(s).
Parameter Value
To Bar, To Beat, To CPT See page 43.
2
[F5]
Press the (Exec) button; the copied event(s) are
pasted.
NOTE
"Place Event"
Events inserted with
may already exist in that area. Existing events are not pushed
towards the end of the track.
Undoing a Micro Edit operation
You can undo a Micro Edit operation.
When you exit the Micro Edit page and execute UNDO in the Style
Composer screen, the data returns to the state prior to when you
entered the Micro Edit page.
However, be aware that if you exit the Micro Edit page and then re-
enter the Micro Edit page and perform an editing operation, you will
only be able to undo the edit that you performed after re-entering
the page.
Style Composer
Explanation
Specifies the position to which the
first event (in chronological order)
of the selected group should be
shifted.
cannot be moved further to the left.
copies the selected event(s).
"Copy Event "
Explanation
Specifies the position where the first
event you copied should be inserted.
are added to any events that
"Place
49