Deleting A User Drum Kit; Exporting User Drum Kits To A Usb Flash Drive (Udk Export); Loading Exported User Drum Kits (Udk Import) - Roland E-A7 Reference Manual

Deleting a User Drum Kit

1
In the Tone section, press the
The User Tone list appears. Press the
access the User Drum Kit list.
2
Use the direct buttons to select the drum kit that you
want to delete.
3
Press the [Option] button.
The UDK Option screen appears.
4
Use the direct buttons to select
A confirmation message appears.
5
Use the function buttons to select
The user drum kit is deleted.
If you decide not to delete, select
* Samples and multisamples are not deleted.
Exporting User Drum Kits to a USB Flash
Drive (UDK Export)
1
In the Tone section, press the
The User Tone list appears. Press the
access the User Drum Kit list.
2
Use the direct buttons to select the drum kit that you
want to export.
3
Press the [Option] button.
The UDK Option screen appears.
4
Use the direct buttons to select
A screen appears in which you can name the UDK.
&
"Assigning Names"
(Owner's Manual: p. 16)
If you decide to cancel, press the
5
[F5]
Press the (Exec) button.
MEMO
The exported drum kit is placed in the
the USB flash drive. It is exported with its user samples and
multisamples.
It may take some time for the export to be completed if the data
size is large.
NOTE
5 It is possible to change the file name when executing UST Export/
UDK Export.
However, this changes only the file name; it does not change the
name of the tone.
This means that if you import a UST or UDK whose file name was
changed, the original tone names are displayed. Since you won't
be able to tell the original tone names, we recommend that you
not change the file name when exporting.
5 When you export, the samples and multisamples remain in the
E-A7. (The data is copied and saved on the USB flash drive.)
If you want to increase the amount of free memory, export the
data, then delete unneeded user drum kits, and execute sample
Clean Up.
If multiple user drum kits use the same drum insts, user samples,
or multisamples, the user samples are not deleted until all related
user drum kits are deleted (i.e., the amount of free memory will
not increase).
[User] button.
"User"
button several times to
"Delete "
"YES "
"NO "
[User] button.
"User" button several times to
"Export "
[Exit] button.
"My UDK"
folder of
Loading Exported User Drum Kits
(UDK Import)
1
In the Tone section, press the
The User Tone list appears. Press the
access the User Drum Kit list.
2
Use the direct buttons or function buttons to select the
import destination.
3
Press the [Option] button.
The UDK Option screen appears.
4
Use the direct buttons to select
Files that can be imported from the USB flash drive are shown.
5
Use the direct buttons to select the file that you want to
import.
A confirmation message appears.
6
To import the data, select
If you want to change the import destination, select
to the page where you can change the import destination.
NOTE
If the user sample memory is full, you can't import user drum kits.
Increase the amount of free memory and then import once again.
MEMO
Place the files that you want to import in the
the USB flash drive.
If there is no "My UDK"
drive), you can either use the E-A7 to format the USB flash drive,
or create a folder named
Sampling Menu
[User] button.
"User"
button several times to
"Import "
"Yes "
"No"
to return
"My UDK"
folder in External Storage (USB flash
"My UDK "
folder of
37