Listing And Code Approvals; Appliance Certifi Cation; Tempered Glass Specifi Cations; Btu Specifi Cations - Heat & Glo SL-550TV-IPI-E Owner's Manual

Hide thumbs Also See for SL-550TV-IPI-E:
Table of Contents

Advertisement

1 1

Listing and Code Approvals

A. Appliance Certifi cation
MODELS: SL-550TV-IPI-E, SL-750TV-IPI-E, SL-950TV-IPI-E
LABORATORY: Underwriters Laboratories, Inc. (UL)
TYPE: B-Vent Gas Appliance
STANDARD: ANSI Z21.50-2007 • CSA 2.22-2007
This product is listed to ANSI standards for "Vented Gas
Fireplaces" and "Gas Fired Appliances for Use at High
Altitudes".
May be installed in a sleeping room when the provisions
for combustion, ventilation and dilution air are met per the
requirements of ANSI 223.1/NFPA 54 National Fuel Gas
Code. In Canada, installation in a sleeping room requires
installation with a thermostat certifi ed for use with this prod-
uct. Consult your local authorities having jurisdiction.
NOTICE: This installation must conform with local codes.
In the absence of local codes you must comply with the
National Fuel Gas Code, ANSI Z223.1-latest edition in
the U.S.A. and the CAN/CGA B149 Installation Codes in
Canada.
This model (natural gas and propane) can be installed in
a bedroom (in Canada) if a thermostat (Model WH-STAT)
is installed with the unit. Consult local code authorities.
Detailed installation instructions for Model WH-STAT are
included with the kit.
NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.
This appliance is tested and approved as either supplemen-
tal room heat or as a decorative appliance. It should not be
factored as primary heat in residential heating calculations.
B. Tempered Glass Specifi cations
Hearth & Home Technologies appliances manufactured
with tempered glass may be installed in hazardous loca-
tions such as bathtub enclosures as defi ned by the Con-
sumer Product Safety Commission (CPSC). The tempered
glass has been tested and certifi ed to the requirements
of ANSI Z97.1 and CPSC 16 CFR 1202 (Safety Glazing
Certifi cation Council SGCC# 1595 and 1597. Architectur-
al Testing, Inc. Reports 02-31919.01 and 02-31917.01).
This statement is in compliance with CPSC 16 CFR Sec-
tion 1201.5 "Certifi cation and labeling requirements"
which refers to 15 U.S. Code (USC) 2063 stating "...Such
certifi cate shall accompany the product or shall otherwise
be furnished to any distributor or retailer to whom the
product is delivered."
Some local building codes require the use of tempered
glass with permanent marking in such locations. Glass
meeting this requirement is available from the factory.
Please contact your dealer or distributor to order.
Heat & Glo • SL-550 / 750 / 950TV-IPI-E • 2119-900 Rev. N • 1/13
C. BTU Specifi cations
Model(s)
U.S. (0-2000 ft.) or Canada (2000-4500 ft.)
SL-550TV-IPI-E
CAN
SL-550TV-IPI-E (LP)
CAN
SL-750TV-IPI-E
CAN
SL-750TV-IPI-E (LP)
CAN
SL-950TV-IPI-E
CAN
SL-950TV-IPI-E (LP)
CAN
Maximum
Minimum
Input BTU/h
Input BTU/h
21,100
14,700
US
18,990
13,230
20,000
14,300
US
18,000
12,870
24,800
17,700
US
22,320
15,930
23,200
17,300
US
20,880
15,570
30,900
21,300
US
27,810
19,170
30,700
22,500
US
27,630
20,250
Orifi ce
Size
(DMS)
44
45
55
56
42
43
54
55
37
38
52
53
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-750tv-ipi-eSl-950tv-ipi-e

Table of Contents