Computer Setting; Adjusting The Height And The Viewing Angle : Prolite Xb2888Hs - Iiyama ProLite XB2888HS User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 31: COMPLIANT TIMING.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XB2888HS

 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 17
degrees upward.
NOTE  Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
 Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
 Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
12 BEFORE YOU OPERATE THE MONITOR
45°
Monitor
Stand
130mm
45°