Answering System - Panasonic KX-TGF372AZ Operating Instructions Manual

Answering system

Problem
The unit does not record new
messages.
I cannot operate the answering
system remotely.
The unit does not emit the
specified number of rings.
Bluetooth PIN
Problem
I cannot remember the PIN.
TGF372AZ(en)_0519_ver003.pdf
Cause/solution
R The answering system is turned off. Turn it on (page 61).
R The answering system does not answer or record calls
from mobile lines.
R The message memory is full. Erase unnecessary
messages (page 62, 63).
R The recording time is set to "Greeting only". Change
the setting (page 67).
R Your phone service provider's voicemail service may be
answering your calls before the unit's answering system
can answer your calls. Change the unit's number of rings
setting (page 66) to a lower value, or contact your phone
service provider.
R The answering system will not answer incoming calls
while the other devices such as headset or handsets are
engaged in a call.
R The remote access code is not set. Set the remote
access code (page 65).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 65).
R The answering system is turned off. Turn it on (page 66).
R You cannot operate the answering system when calling a
mobile phone paired to the base unit.
R If the ring once setting is turned off (page 32), the number
of rings decreases by 1 from the specified number of
rings.
Cause/solution
R Change the PIN using the following method.
Handset:
1
MMENUN#619
2
*7000
3
Enter the new 4-digit PIN. a MOKN
4
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
77
Useful Information
2015/05/19 9:28:47
77