Related Manuals for SVT innovations SVT-MF4
Summary of Contents for SVT innovations SVT-MF4
-
Page 1: User Manual
SVT-MF4 Outdoor Station D User Manual Please read this user manual prior to installing the system, and keep it well for future use. -
Page 2: Table Of Contents
CONTENTS 1. Parts and Functions....................1 2. Terminal Descriptions ..................2 3. Specifications....................... 3 4. Mounting ....................... 3 4.1 Mounting without the Rain Guard..............3 4.2 Mounting with the Rain Guard................4 4.3 Mounting the Indoor Monitor................4 5. System Wiring and Connections ................. 5 5.1 SVT-4 System with one entrance .............. -
Page 3: Parts And Functions
1.Parts and Functions Description LED lights High resolution camera Built-in speaker Call button Built-in microphone Name plate Card Reader Status light. Calling in: red light Monitoring/Talking: blue light Description Built-in microphone Monitor button Intercom button Door unlock button Talk button TFT 7”... -
Page 4: Terminal Descriptions
2.Terminal Descriptions... -
Page 5: Specifications
3.Specifications INDOOR MONITOR OUTDOOR STATION Voltage: DC 14.5V Voltage: DC 14.5V Communication duration: 120s. NO/NC/COM: Max. 14.5V 200mA Lock Power Supply: Must be used according to lock. Communication transmission: 2-way communication Unlocking time: 01 - 99 seconds Working temperature: 14°F to 131°F / -10°C to 55°C Communication duration: 120s. -
Page 6: Mounting With The Rain Guard
4.2. MOUNTING WITH THE RAIN GUARD Screw anchors Wall hole Rain cover Screws Screws (fix with rain cover) 4.3. MOUNTING THE INDOOR MONITOR... -
Page 7: System Wiring And Connections
System Wiring and Connections 5.1. SVT-MF4 SYSTEM WITH ONE ENTRANCE... -
Page 8: Svt-4 System With Two Entrances
5.2. SVT-MF4 SYSTEM WITH TWO ENTRANCES... -
Page 9: Svt-4 Wiring Connection
J3: Reserved port. Lower module: PWR: Connect a SVT-MF4 PS17 Power supply. J3: Use this port to connect a door lock. The door lock is limited to 14.5V, 200mA. Must use an additional power supply for the door lock. Ensure the power supply is compatible with the door lock specifications. -
Page 11: Electric Door Lock Connection
5.3.3 Electric Door Lock Connection 1. Use the port J3 of the lower module to connect a door lock. 2. The door lock is limited to 14.5V, 120mA. 3. Must use an additional power supply for the door lock. Ensure the power supply is compatible with the door lock specifications. -
Page 12: Cable Requirements
6.Cable Requirements Cable Usage CAT5 cable (must solder the wires together to ensure a good connection). 230 feet 30 feet Using different cables may affect the maximum distance the system can reach. 70 meters 10 meters NOTE: 1. The system expands to a maximum of 2 outdoor stations and 4 indoor monitors. 2. -
Page 13: User Instructions
7.User instructions Visitor calls The visitor presses The visitor presses the call button the call button on outdoor on outdoor station-1 station-2 Ring Ring Press the call button at anytime, the indoor monitor will show the view The visitor image shown on from front door... -
Page 14: Monitor
Monitor Press the monitor button Press once Press twice Monitor outdoor Monitor outdoor station 1 station 2 The indicator light of The indicator light of Door 1 is on. Door 2 is on. Press the Press the monitor talk button button Monitor the Press the... -
Page 15: Intercom
Intercom In the standby mode, press intercom button indoor monitor All indoor monitors ring indoor monitor presses button or pick up the handset to talk. During the talking, any indoor monitor presses the intercom Talk begins button Press the TALKPress the TALKING button hang-upbutton or hang-... -
Page 16: How To Set Up User Codes
8. How to set up the user codes SVT-MF4 Outdoor Station D requires the SVT Remote Control for programming. SVT REMOTE CONTROL works as a remote access control . It is required to program the SVT-4 Outdoor Station D settings, as registering and deleting fingerprints, unlocking time and fingerprint security level. - Page 17 Set master card In the setting mode: Press 0, a Di sound heard, and press 7 to hear another Di sound. Then enter 6-digits master card number or swipe the master card. After a Di sound, the setting is completed. Press * to return to setting mode, and press * again to return to standby mode.
- Page 18 Delete all user cards In the setting mode: Press 9 with a Di sound heard. And then press 9, two short Di sounds can be heard. After it stops, it indicates the deletion of all user cards is successful. Press * to return to standby mode. No operation in 30 seconds will return automatically.
- Page 20 The design and specifications of this user manual can be changed without any notification to the user. All copyright and interpretation rights are reserved to SVT Innovations Inc.
Need help?
Do you have a question about the SVT-MF4 and is the answer not in the manual?
Questions and answers