Other Operations; Presetting Radio Stations - Sony HCD-GS10 Service Manual

Other Operations

Creating your own CD program
(Program Play)
1
Press CD to select the CD function.
2
Press PLAY MODE repeatedly until "PGM" appears
while the player is stopped.
3
Press / (or / on the unit)
repeatedly until the desired track or file number
appears.
When programing MP3 files, press +/
repeatedly to select the desired folder, and then select
the desired file.
Selected track or file number
4
Press ENTER to add the track or file to the
program.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 15 tracks or files.
6
To play your program of tracks or files, press
CD on the unit) .
The program remains available until you open the disc
tray. To play the same program again, select the CD
function, and press (or CD on the unit)
To cancel Program Play
Press PLAY MODE repeatedly until "PGM"
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR on the remote while the player is
stopped.
To view program information, such as total
track number of the program
Press DISPLAY repeatedly.

Presetting radio stations

You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (See "Listening to the
radio").
2
Press TUNER MEMORY .
Preset number
3
Press +/ (or TUNING + or on the unit)
repeatedly to select your desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4
Press ENTER .
5
Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. The
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE repeatedly until "PRESET" appears, and
then press +/ (or TUNING + or on the unit)
repeatedly to select the desired preset number.
Using the Timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP repeatedly. If you select "AUTO, " the
system automatically turns off after the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ to adjust the volume.
To start from a specific CD track or MP3 file, create
your own CD program.
2
Press CLOCK/TIMER SET .
3
Press / repeatedly to select "PLAY, " and
then press ENTER .
(or
"ON TIME" appears, and the hour indication flashes.
4
Set the time to start playing.
Press / repeatedly to set the hour, and
.
then press ENTER .
The minute indication flashes. Use the procedure
above to set the minutes.
5
Use the same procedure as in step 4 to set the time
to stop playing.
6
Select the sound source.
Press / repeatedly until the desired
sound source appears, and then press ENTER
display shows the timer settings.
7
Press to turn off the system.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
repeatedly until "PLAY" appears, and then press ENTER
.
To cancel the timer
Repeat the same procedure as above until "OFF" appears,
and then press ENTER .
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the setting is not canceled
manually.
HCD-GS10/GS30DAB
. The
/
5