Download  Print this page

Sony HCD-RG333 Service Manual

Mini hi-fi component system.
Hide thumbs

Advertisement

HCD-RG333/RG441
SERVICE MANUAL
Ver 1.0 2004. 04
• HCD-RG333/RG441 is the
tuner, deck, CD and amplifier
section in MHC-RG333/RG441.
Amplifier section
European and Russian models:
HCD-RG333:
DIN power output (rated): 100 + 100 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
125 + 125 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference):
250 + 250 watts (6 ohms at
1 kHz, 10% THD)
Other models:
HCD-RG441:
The following measured at AC 120, 127, 220, 240 V,
50/60 Hz
DIN power output (rated): 120 + 120 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
150 + 150 watts (6 ohms at
1 kHz, 10% THD)
Sony Corporation
9-877-772-01
2004D04-1
Home Audio Company
© 2004. 04
Published by Sony Engineering Corporation
(Photo: HCD-RG333)
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Optical Pick-up Name
Tape Deck Model Name Using Similar Machanism
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Inputs
GAME INPUT AUDIO L/R (phono jacks):
GAME INPUT VIDEO (phono jack):
Outputs
PHONES (stereo mini jack):
VIDEO OUT (phono jack): max. output level
SPEAKER:
MINI HI-FI COMPONENT SYSTEM
AEP Model
UK Model
HCD-RG333
E Model
HCD-RG441
NEW
CDM74-F1BD81
KSM-215DCP/C2NP
NEW
CWM43FF-25
voltage 250 mV,
impedance 47 kilohms
1 Vp-p, 75 ohms
accepts headphones of
8 ohms or more
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
accepts impedance of 6 to
16 ohms
– Continued on next page –
1

Advertisement

Table of Contents

   Also See for Sony HCD-RG333

   Related Manuals for Sony HCD-RG333

   Summary of Contents for Sony HCD-RG333

  • Page 1 HCD-RG333/RG441 SERVICE MANUAL AEP Model UK Model Ver 1.0 2004. 04 HCD-RG333 E Model HCD-RG441 • HCD-RG333/RG441 is the tuner, deck, CD and amplifier section in MHC-RG333/RG441. (Photo: HCD-RG333) Model Name Using Similar Mechanism CD Mechanism Type CDM74-F1BD81 Section Optical Pick-up Name...
  • Page 2 180 watts Recording system 4-track 2-channel, stereo 0.25 watts Frequency response 50 – 13,000 Hz (±3 dB), (at the Power Saving Mode) using Sony TYPE I Other models: cassettes HCD-RG441: 155 watts Tuner section Dimensions (w/h/d) incl. projecting parts and controls...
  • Page 3 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 4 HCD-RG333/RG441 The release method of a CD disc tray LOCK function NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT There is a disc lock function for the disc theft prevention for a demonstration at a shop front in this machine.
  • Page 5: Table Of Contents

    HCD-RG333/RG441 TABLE OF CONTENTS 1. SERVICING NOTE 5-5. Circuit Boards Location ............ 30 5-6. Note for Printed Wiring Boards 1-1. Service Position-1 (AMP Board) ........6 and Schematic Diagrams ..........31 1-2. Service Position-2 (BD81A Board) ........6 5-7. Waveforms ................. 31 5-8.
  • Page 6: Servicing Note

    HCD-RG333/RG441 SECTION 1 SERVICING NOTE 1-1. SERVICE POSITION-1 (AMP BOARD) To inspect the AMP board, turn both of the front panel and the CD mechanism deck so that the left side of the product faces down. CD mechanism deck front panel AMP board 1-2.
  • Page 7: General

    HCD-RG333/RG441 SECTION 2 GENERAL This section is extracted from instruction manual.
  • Page 8: Remote Control

    HCD-RG333/RG441...
  • Page 9: Disassembly

    HCD-RG333/RG441 SECTION 3 DISASSEMBLY Note : Disassemble the unit in the order as shown below. 3-1. CASE (TOP) (Page 10) 3-2. CD DOOR (Page 10) 3-3. FRONT PANEL SECTION (Page 11) 3-4. CD MECHANISM DECK 3-5. TAPE MECHANISM DECK, 3-6.
  • Page 10: Case (top)

    HCD-RG333/RG441 Note : Follow the disassembly procedure in the numerical order given. 3-1. CASE (TOP) qd two screws (+BVTP 3 × 10) qh case (top) 7 two screws (case 3 TP2) qs case (side-L) 9 screw (+BVTP 3 × 10)
  • Page 11: Front Panel Section

    HCD-RG333/RG441 3-3. FRONT PANEL SECTION 4 screw (+BVTP 3 × 8) qa CN304 1 CN805 3 CN873 8 screw (+BVTP 3 × 10) 5 screw (+BVTP 3 × 8) qs CN112 7 screw (+BVTP 3 × 10) qd CN103 0 CN309...
  • Page 12: Tape Mechanism Deck, Game Jack Board

    HCD-RG333/RG441 3-5. TAPE MECHANISM DECK, GAME JACK BOARD 4 LEAD board 3 tape mechanism deck 2 six screws (+BVTP 2.6 × 8) 1 connector 6 GAME JACK board 5 two screws (+BVTP 2.6 × 8) 3-6. PANEL BOARD 4 seven claws...
  • Page 13: Back Panel Section, Sub Trans Board

    HCD-RG333/RG441 3-7. BACK PANEL SECTION, SUB TRANS BOARD 0 SUB TRANS board qa back panel section 3 CN901 9 two screws (+BVTP 3 × 10) 2 CN906 7 two screws (+BVTP 3 × 10) 1 CN904 6 two screws (+BVTP 3 × 10)
  • Page 14: Main Board

    HCD-RG333/RG441 3-9. MAIN BOARD 4 MAIN board 1 CN907 MAIN board 3 CN441 2 two screws (+BVTP 3 × 8) 3-10. AMP BOARD 2 two screws (+BVTT 4 × 8) 3 screw 4 two screws (+BVTP 3 × 14) (+BVIT 3 × 8R )
  • Page 15: Bd81a Board

    HCD-RG333/RG441 3-11. BD81A BOARD 3 screw (+BVTP 2.6 × 8 ) 4 gap tube 1 CN202 6 BD81A board 2 CN101 Remove soldering from the four points. 3-12. CONNECT BOARD 1 CN871 2 two screws (+BVTP 2.6 × 8 )
  • Page 16: Driver Board, Sw Board

    HCD-RG333/RG441 3-13. DRIVER BOARD, SW BOARD 1 two screws (+BTTP (M2.6)) 3 CN703 4 DRIVER board 5 screw (+BTTP (M2.6)) 6 SW board 2 CN702 3-14. OPTICAL PICK-UP 1 floating screw (+PTPWH M2.6) 2 h older (213) ASSY 7 two insulators...
  • Page 17: Sensor Board

    HCD-RG333/RG441 3-15. SENSOR BOARD 1 floating screw (+PTPWH M2.6) 2 t ray 8 s crew (+BTTP (M2.6)) 3 b elt (table) 0 SENSOR board 4 floating screw (+PTPWH M2.6) 5 p ulley (table) 6 floating screw 9 CN731 (+PTPWH M2.6) 7 g ear (geneva) 3-16.
  • Page 18: Motor (ld) Board

    HCD-RG333/RG441 3-17. MOTOR (LD) BOARD 2 two screws (+BTTP (M2.6)) 4 Remove the two solderings of motor. 3 MOTOR (LD) board 5 l oading motor assy (M751) 1 b elt (loading)
  • Page 19: Test Mode

    HCD-RG333/RG441 SECTION 4 TEST MODE [Change-over of AM Tuner Step between 9 kHz and 2) Error display 10 kHz] Disc error • A step of AM channels can be changed over between 9 kHz and Display Error 10 kHz. E00D01022...
  • Page 20 HCD-RG333/RG441 [PANEL Test Mode] [MC Test Mode] • All fluorecent segments and LEDs are tested. • This mode is used to test the function of the equalizer. • Keyboard check. Procedure: 1. Press ?/1 button to turn the set ON.
  • Page 21 HCD-RG333/RG441 [CD Repeat 5 Times Limit Release Mode] Procedure: Press ?/1 button to turn the set ON. Select the function “CD”. Press three buttons x , CD and ENTER simultaneously. The message “LIMIT OFF” is displayed. Press ?/1 button the set OFF.
  • Page 22: Diagrams

    HCD-RG333/RG441 SECTION 5 DIAGRAMS 5-1. IC PIN DESCRIPTIONS • IC101 CXD3059AR (RF AMP) (BD81A BOARD) Pin No. Pin Name Pin Description MIRR Mirror signal input/output Not used in this set. (Open) DFCT Defect signal input/output Not used in this set. (Open) Focus OK signal input/output Not used in this set.
  • Page 23 HCD-RG333/RG441 Pin No. Pin Name Pin Description FILO Master PLL (slave=digital PLL) filter signal output FILI Master PLL filter signal input Master PLL charge pump signal output AVDD5 — Analog power supply pin (+3.3 V) DDVROUT DC/DC converter signal output...
  • Page 24 HCD-RG333/RG441 Pin No. Pin Name Pin Description DATA Serial data signal input — Internal digital ground pin XLAT Latch signal input The serial data is latched at the falling edge CLOCK Serial data transfer clock signal input — Internal digital power supply pin (+3.3 V)
  • Page 25 HCD-RG333/RG441 • IC601 LC876996A-53H2-E (SYSTEM CONTROLLER) (PANEL BOARD) Pin No. Pin Name Pin Description O-MP3 CS CS signal output to CD digital processor O-MP3 LP MOTER LP signal output to CD digital processor and motor signal output I-MP3 ACK SOL-B...
  • Page 26 HCD-RG333/RG441 Pin No. Pin Name Pin Description STREAM-LED4/MOTOR Illumination LED control signal output STREAM-LED3/MP3-STB Illumination LED control signal output STREAM-LED2 Illumination LED control signal output STREAM-LED1 Illumination LED control signal output I-LC72121 DI Data signal input from tuner O-LC72121 CE...
  • Page 27: Block Diagram -cd Section

    HCD-RG333/RG441 5-2. BLOCK DIAGRAM — CD SECTION — OPTICAL PICK-UP BLOCK (KSM-215DCP) DETECTOR DIGITAL RF AMP +1.7V SIGNAL PROCESSOR IC101 +3.3V IC301 +1.5V REG PCMDI SDO0 +3.3V IC303 LRCKI LRCKIA LRCK SFSY/LRCKIB VDDM PCMD SDIO BCKIA LD MOTOR DRIVER BCKI...
  • Page 28: Block Diagram -main Section

    HCD-RG333/RG441 5-3. BLOCK DIAGRAM — MAIN SECTION — SOUND PROCESSOR IC101 BUFFER RG333 JK441 IC102 RG441 MP3-STB RY441 POWER AMP CD-L 1 CDL VOUT1 SECTION IC441 CD-R R-CH (Page 27) VOUT2 R-CH SPEAKER OVERLOAD DET MUTE MUTE Q306 Q103 Q481,482...
  • Page 29: Block Diagram -panel/power Section

    HCD-RG333/RG441 5-4. BLOCK DIAGRAM — PANEL/POWER SECTION — SYSTEM CONTROLLER IC601(2/2) PT901 POWER TRANSFORMER S641-S650,SW601 RG441 FUNCTION STREM-LED1 DRIVER 25 KEY3 D401 Q610 LED610 S601-S608,S610-S612 FUNCTION VH– F908 RG441:E2,E51 MODEL 27 KEY1 S901 STREM-LED3 DRIVER S621-624,626-630 Q612 VOLTAGE LED612 FUNCTION...
  • Page 30: Circuit Boards Location

    HCD-RG333/RG441 5-5. CIRCUIT BOARDS LOCATION SENSOR board BD81A board SW board MOTOR (TB) board MOTOR (LD) board DRIVER board CONNECT board TRANS board AMP board VIDEO OUT board SUB TRANS board REM board PANEL board MAIN board 6 STREAM LED board...
  • Page 31: Note For Printed Wiring Boards And Schematic Diagrams

    HCD-RG333/RG441 5-6. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 5-7. WAVEFORMS Note on Printed Wiring Board: Note on Schematic Diagram: – PANEL Board – • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF •...
  • Page 32: Printed Wiring Board -cd Mechanism Section (1/2)

    HCD-RG333/RG441 5-8. PRINTED WIRING BOARD — CD MECHANISM SECTION (1/2) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. M101 IC303 C305 C303 S101 R313 C257 R419 C315 R403 C316 C306 R352 M102 C313 R302...
  • Page 33: Schematic Diagram -cd Mechanism Section (1/2)

    HCD-RG333/RG441 5-9. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (1/2) — • Refer to page 50 for IC Block Diagrams. CN101 R307 TP423 C125 TP304 C142 TP10 C307 C134 TP11 TP424 IC B/D C151 TP12 R143 TP13 TP14 C124 C141 TP102...
  • Page 34: Printed Wiring Boards -cd Mechanism Section (2/2)

    HCD-RG333/RG441 5-10. PRINTED WIRING BOARDS — CD MECHANISM SECTION (2/2) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. MAIN BOARD CN301 (Page 38) S751 CN751 (LEVER SW) • Semiconductor Location Ref. No. Location D701...
  • Page 35: Schematic Diagram -cd Mechanism Section (2/2)

    HCD-RG333/RG441 5-11. SCHEMATIC DIAGRAM — CD MECHANISM SECTION (2/2) — • Refer to page 50 for IC Block Diagrams. IC701 IC B/D R702 R701 D701 C715 CN704 C751 CN721 M751 IC712 IC B/D R712 R713 CN705 C752 CN751 D711 R711...
  • Page 36: Schematic Diagram -main Section (1/2)

    HCD-RG333/RG441 5-12. SCHEMATIC DIAGRAM — MAIN SECTION (1/2) — • Refer to page 51 for IC Block Diagram. CN309 R151 Q101 R391 R386 (Page 43) R385 R217 R216 R219 R388 R152 R154 R153 R392 C235 R218 Q102 C175 R387 R389...
  • Page 37: Schematic Diagram -main Section (2/2)

    HCD-RG333/RG441 5-13. SCHEMATIC DIAGRAM — MAIN SECTION (2/2) — • Refer to page 51 for IC Block Diagrams. (Page 36) Q362 C270 R361 R362 R364 Q361 R363 R275 D316 R274 Q315 Q314 R323 C252 R253 R321 C312 R324 R322 R262...
  • Page 38: Printed Wiring Board -main Section

    HCD-RG333/RG441 5-14. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. (Page 34) (Page 42) (Page 42) • Semiconductor Location Ref. No. Location JW146 D201 CN101 D202 JW108 Q313...
  • Page 39: Printed Wiring Boards -panel Section

    HCD-RG333/RG441 5-15. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. IC610 (Page 42) SV-HCDRG333-PANEL Administrator (Page 38) (Page 42) (Page 42) • Semiconductor Location Ref. No. Location Ref. No.
  • Page 40: Schematic Diagram -panel Section (1/2)

    HCD-RG333/RG441 5-16. SCHEMATIC DIAGRAM — PANEL SECTION (1/2) — • Refer to page 51 for IC Block Diagram. CN605 R704 R706 R708 R700 JW660 (Page 43) R702 JW659 Q610 Q612 Q611 Q614 Q615 Q613 R698 CN604 JW674 JW718 (Page 43)
  • Page 41: Schematic Diagram -panel Section (2/2)

    HCD-RG333/RG441 5-17. SCHEMATIC DIAGRAM — PANEL SECTION (2/2) — • Refer to page 31 for Waveforms. FL601 CN603 JW812 R785 R783 R782 C623 R781 C622 R780 R779 R710 R712 R778 LED601 (Page 43) R719 C620 C621 R777 R776 R718 R772...
  • Page 42: Printed Wiring Boards -jack Section

    HCD-RG333/RG441 5-18. PRINTED WIRING BOARDS — JACK SECTION — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. (Page 39) (Page 38) (Page 39) (Page 38) (Page 39) (Page 32) J803 • Semiconductor Location LP802 Ref. No.
  • Page 43: Schematic Diagram -jack Section

    HCD-RG333/RG441 5-19. SCHEMATIC DIAGRAM — JACK SECTION — CN874 C830 C831 S660 SW601 CN804 J801 CN871 JW876 FB871 (Page 36) (Page 36) JW875 R673 JW878 C832 JW877 FB872 JW871 W803 JW872 CN873 JW873 CN606 CN607 JW874 (Page 33) JW879 (Page 41)
  • Page 44: Printed Wiring Board -power Amp Section (rg333)

    HCD-RG333/RG441 5-20. PRINTED WIRING BOARD — POWER AMP SECTION (RG333) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D401 D441 D442 D443 D481 D482 D483 IC441 Q441 Q442...
  • Page 45: Printed Wiring Boards -transformer Section (rg333)

    HCD-RG333/RG441 5-21. PRINTED WIRING BOARDS — TRANSFORMER SECTION (RG333) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. (Page 44) (Page 38) • Semiconductor Location Ref. No. Location D901 D902 D903 D904 D905 D906 C-12...
  • Page 46: Schematic Diagram -power Section (rg333)

    HCD-RG333/RG441 5-22. SCHEMATIC DIAGRAM — POWER SECTION (RG333) — JW403 L441 RY441 R451 C441 R441 R461 JW441 IC441(1/2) C445 R413 R462 R466 R465 R464 R463 R411 TH441 L442 C459 C456 C455 R447 D443 Q483 JK441 R483 R485 C458 C457 C451...
  • Page 47: Printed Wiring Board -power Amp Section (rg441)

    HCD-RG333/RG441 5-23. PRINTED WIRING BOARD — POWER AMP SECTION (RG441) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D401 D402 D441 D442 D443 D444 D445 D446 D481 D482...
  • Page 48: Printed Wiring Boards -transformer Section (rg441)

    HCD-RG333/RG441 5-24. PRINTED WIRING BOARDS — TRANSFORMER SECTION (RG441) — • Refer to page 30 for Circuit Boards Location. : Uses unleaded solder. LP903 D904 D905 CN904 JW911 CN906 D902 D903 CN902 D901 C911 JW912 Q902 C906 R908 D908 C909...
  • Page 49: Schematic Diagram -power Section (rg441)

    HCD-RG333/RG441 5-25. SCHEMATIC DIAGRAM — POWER SECTION (RG441) — C461 R467 R496 D445 L441 R449 RY441 C441 R474 R411 R441 R461 JK441 Q491 JW441 R462 IC441(1/2) R466 R465 C445 JW403 L442 C451 R455 R472 R473 TH441 D443 R485 C453 Q483...
  • Page 50: Ic Block Diagrams

    HCD-RG333/RG441 5-26. IC BLOCK DIAGRAMS IC301 TC94A34FG-002 (BD81A BOARD) IC251 BA5947FM (BD81A BOARD) CH4OUTR CH1PUTF CH1OUTR CH4OUTF LRCKIA CH3OUTF CH2OUTF PIN26 6.5k CH2OUTR CH3OUTR BCKIA Vref POWVCC POWVCC (ch3, 4) (ch1, 2) 50k 50k 50k 50k SDI0 MUTE CNF4 50k 50k...
  • Page 51 HCD-RG333/RG441 IC101 BD3401KS2 (MAIN BOARD) TNF2 VOLOUT2 BASS MIDDLE TREBLE TNF1 BBNF2 SUR1 BBIN2 BASS MIDDLE TREBLE SURROUND SUR2 fc=100HZ LINEOUT2 LINEOUT1 BUFFER MIC MIX SAOUT2 VOCAL FADER SWOUT SAOUT1 FILTER 1/2 Vcc GAME L GAME R TUNER L INPUT...
  • Page 52: Exploded Views

    HCD-RG333/RG441 SECTION 6 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • Accessories are given in the last of this The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied.
  • Page 53: Front Panel Section (1)

    HCD-RG333/RG441 6-2. FRONT PANEL SECTION (1) not supplied (REM board) FL601 not supplied (GAME JACK board) not supplied (LEAD board) not supplied not supplied not supplied (H/P JACK board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-951-620-01 SCREW (2.6X8), +BVTP...
  • Page 54: Front Panel Section (2)

    HCD-RG333/RG441 6-3. FRONT PANEL SECTION (2) not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-231-841-01 SPRING (HEART CAM-B) 4-231-824-01 CAM (A), HEART 4-231-825-01 CAM (B), HEART 4-231-836-01 SPRING (HEART CAM-A) 4-224-104-41 DAMPER...
  • Page 55: Front Panel Section (3)

    HCD-RG333/RG441 6-4. FRONT PANEL SECTION (3) not supplied not supplied not supplied supplied not supplied (6 STREAM LED board) not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description...
  • Page 56: Main Board Section

    HCD-RG333/RG441 6-5. MAIN BOARD SECTION not supplied PT901 not supplied F908 F906 F905 F907 F909 F904 not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
  • Page 57: Cd Mechanism Section (1)

    HCD-RG333/RG441 6-6. CD MECHANISM SECTION (1) (CDM74-F1BD81) M741 CD mechanism deck section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-21 SCREW (M2.6), +BTTP 4-243-820-01 GEAR (TABLE) 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 4-243-819-01 GEAR (GENEVA)
  • Page 58: Cd Mechanism Section (2)

    HCD-RG333/RG441 6-7. CD MECHANISM SECTION (2) (CDM74-F1BD81) RE701 M751 S101 not supplied (CONNECT board) not supplied FC901 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No.
  • Page 59: Electrical Parts List

    HCD-RG333/RG441 SECTION 7 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example: 0 are critical for safety.
  • Page 60 HCD-RG333/RG441 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D482 8-719-991-33 DIODE 1SS133T-77 R444 1-247-871-91 CARBON 1/4W D483 8-719-991-33 DIODE 1SS133T-77 (RG333) (RG333) R444 1-247-873-91 CARBON 1/4W < GROUND TERMINAL BOARD > (RG441) R445 1-247-831-91 CARBON...
  • Page 61 HCD-RG333/RG441 BD81A Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R472 1-249-435-11 CARBON 1/4W C122 1-107-826-11 CERAMIC CHIP 0.1uF (RG441) C123 1-107-826-11 CERAMIC CHIP 0.1uF R473 1-247-863-91 CARBON 1/4W C124 1-162-959-11 CERAMIC CHIP 330PF (RG441) C125 1-164-360-11 CERAMIC CHIP 0.1uF...
  • Page 62 HCD-RG333/RG441 BD81A CONNECT DRIVER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > R351 1-216-809-11 METAL CHIP 1/10W R352 1-216-809-11 METAL CHIP 1/10W CN101 1-770-425-11 CONNECTOR, FFC/FPC 16P R353 1-216-809-11 METAL CHIP 1/10W CN201...
  • Page 63 HCD-RG333/RG441 DRIVER GAME JACK H/P JACK LEAD MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > H/P JACK BOARD ************** CN701 1-785-338-11 PIN, CONNECTOR (LIGHT ANGLE) 12P CN702 1-784-766-11 CONNECTOR, FFC 5P < CAPACITOR >...
  • Page 64 HCD-RG333/RG441 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C132 1-126-947-11 ELECT 47uF C229 1-126-963-11 ELECT 4.7uF C135 1-131-690-31 FILM 0.068uF C230 1-126-947-11 ELECT 47uF C136 1-131-690-31 FILM 0.068uF C235 1-164-156-11 CERAMIC CHIP 0.1uF C137...
  • Page 65 HCD-RG333/RG441 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C321 1-126-961-11 ELECT 2.2uF < JUMPER RESISTOR > C342 1-164-156-11 CERAMIC CHIP 0.1uF C351 1-164-357-11 CERAMIC CHIP 0.001uF FB201 1-216-864-11 SHORT CHIP C352 1-126-965-91 ELECT 22uF...
  • Page 66 HCD-RG333/RG441 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R106 1-216-851-11 METAL CHIP 330K 1/10W R197 1-216-825-11 METAL CHIP 2.2K 1/10W R107 1-216-835-11 METAL CHIP 1/10W R198 1-216-825-11 METAL CHIP 2.2K 1/10W R108 1-216-816-11 METAL CHIP...
  • Page 67 HCD-RG333/RG441 MAIN MOTOR (LD) MOTOR (TB) PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R274 1-216-864-11 SHORT CHIP R392 1-216-821-11 METAL CHIP 1/10W R275 1-216-864-11 SHORT CHIP R393 1-216-833-11 METAL CHIP 1/10W R281 1-216-825-11 METAL CHIP 2.2K...
  • Page 68 HCD-RG333/RG441 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C641 1-164-156-11 CERAMIC CHIP 0.1uF < JUMPER RESISTOR > C642 1-164-156-11 CERAMIC CHIP 0.1uF C643 1-164-156-11 CERAMIC CHIP 0.1uF JR607 1-216-864-11 SHORT CHIP C644 1-126-157-11 ELECT...
  • Page 69 HCD-RG333/RG441 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R628 1-216-833-11 METAL CHIP 1/10W R685 1-216-841-11 METAL CHIP 1/10W R629 1-216-150-91 RES-CHIP 1/8W R686 1-216-841-11 METAL CHIP 1/10W R630 1-216-809-11 METAL CHIP 1/10W R687 1-216-833-11 METAL CHIP...
  • Page 70 HCD-RG333/RG441 PANEL SENSOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R751 1-216-845-11 METAL CHIP 100K 1/10W S606 1-762-875-21 SWITCH, KEYBOARD (DISC 3) R752 1-216-845-11 METAL CHIP 100K 1/10W S607 1-762-875-21 SWITCH, KEYBOARD (DISC SKIP/EX-CHANGE) R753...
  • Page 71 HCD-RG333/RG441 SUB TRANS TRANS VIDEO OUT 6 STREAM LED Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4956-293-1 SUB TRANS BOARD, COMPLETE (RG333) < CONNECTOR > X-4956-294-1 SUB TRANS BOARD, COMPLETE (RG441:E2,E51,AR) CN904 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P...
  • Page 72 HCD-RG333/RG441 6 STREAM LED Ref. No. Part No. Description Remark < SWITCH > SW601 1-786-289-11 SWITCH, DETECTION (l – EQ + L) ************************************************************* MISCELLANEOUS *************** 1-400-285-11 F-BEAD, E2515MRT 1-769-940-11 WIRE (FLAT TYPE) (11 CORE) (RG441) 1-777-353-11 WIRE (FLAT TYPE) (15 CORE) (RG333)
  • Page 73 HCD-RG333/RG441 MEMO...
  • Page 74 HCD-RG333/RG441 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004. 04...

This manual is also suitable for:

Hcd-rg441

Comments to this Manuals

Symbols: 0
Latest comments: