Quick Reference Guide
Service Information
The STB3508/3578 cordless scanner cradle acts as a stand, host communication
interface and charger for the LS3578 cordless scanner. It can sit on a desktop or
be mounted on a wall.
The STB3578 cradle receives data from the scanner via a Bluetooth radio, and
sends that data to the host through an attached cable. The cradle also charges the
scanner's internal battery pack when the scanner is inserted. The scanner can be
charged from an external power supply or using a powered host cable.
This document provides basic instructions on setting up and using the cradle.
Unless otherwise noted, "cradle" refers to both configurations of the cradle. Any
discussion of transmission of information refers specifically to the STB3578
cradle.
CAUTION
STB3508/3578 cradles. LS3578 cordless scanners are incompatible with
STB3408/3478 cradles.
Equipment Supplied
The cradle package includes:
• Cradle
• Four rubber feet (for desk mounting).
Accessories
The following equipment may be needed:
• Three 1.5" #8 Philips head screws (for wall mounting, if applicable, not
available from Zebra).
• Power supply for desk/wall mounting configuration (p/n 50-14000-266R).
Save the shipping container for storing or shipping. Inspect all equipment for
damage. If anything is damaged or missing, call an authorized
immediately.
Support Center
Related Documentation
LS3578 Product Reference Guide, p/n 72-93911-xx.
LS3578 Quick Start Guide, p/n 72-93587-xx.
This documentation is available at:
LS3478 cordless scanners are incompatible with
http://www.zebra.com/support.
Zebra business
3