Inserting The Scanner In The Cradle; Sending Data To The Host Computer - Motorola STB3508 Quick Reference Manual

Quick Reference Guide

Inserting the Scanner in the Cradle

To insert the scanner in the cradle:
• Insert the scanner top first. Push the handle until it clicks into place, engaging
the contacts in the cradle and scanner.

Sending Data to the Host Computer

The cradle receives data from the scanner via a wireless radio connection and
transmits it to the host computer via the host cable. The scanner and cradle must
be paired for successful wireless communication.
Pairing
Pairing registers a scanner to the cradle such that the scanner and cradle can
exchange information. The STB3578 operates in two modes: scanner-to-cradle
and multi scanner-to-cradle. In scanner-to-cradle mode, the scanner is paired to
the cradle either by insertion into the cradle (if pairing on insertion is enabled), or
by scanning the pairing bar code. In multi scanner-to-cradle mode, up to three
scanners can be paired to one cradle. A multipoint bar code must be scanned to
activate this feature. Refer to the Product Reference Guide for more information.
The cradle includes pairing bar codes on both its front and back. To pair the
scanner with the cradle, scan a pairing bar code. A high-low-high-low beep
sequence followed by a low-high beep sequence indicates successful pairing and
connection to the remote device. A long low, long high beep sequence indicates
unsuccessful pairing. Refer to the Product Reference Guide for more information.
7