Working With A Speakerphone; Working With The Clarity Rc200 Speakerphone - Able-phone AP-5000 User Manual

9
by the name "pin". This method can be used in other situations that
require dialing a number during a call.

Working with a Speakerphone

Dialer can be connected and used with a speakerphone. Since
working with a speakerphone usually means that the voice signal
level coming from the user will be lower then when working with a
handset, it is recommended (but not mandatory) that you change
Dialer's microphone mode by following these steps:
A. Pick up the handset. If names are stored, Dialer asks you for
a name to call. Press the pound key (#).
B. While hearing the main menu, press the '7' key to toggle
between 'handset mode' and 'speakerphone mode'. Select
'speakerphone mode'.

Working with the Clarity RC200 speakerphone

Dialer has a unique operational mode, called "Basic" which is
specifically designed to work with the RC200 speakerphone. In this
mode, after you press the speakerphone button (or pick up the
handset), Dialer will silently wait for the pound key (#) to be pressed.
Only after that key has been pressed will Dialer resume normal
operation, such as asking for a name to dial or reading the menu. This
pound key (#) will be transmitted from the RC200. Follow these easy
steps to activate the "Basic" mode:
In Dialer:
A. Pick up the handset. If names are stored, Dialer asks you for
a name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '9' key to toggle
between 'Basic mode' and 'Freedom mode'. Select 'Basic
mode'.
In the RC200:
A. Follow the manufacturer's instructions on how to set up the
RC200; and make sure that the phone, the remote control,
and any other optional accessories work. Be sure to turn off
the scan feature, as described on page 5 of the
manufacturer's instructions for the RC200.
B. Program only the first memory location with a single pound
key (#).
[Type text]