Working With A Pbx; Changing The Spoken Language; Chapter Three - Able-phone AP-5000 User Manual

10
Now connect the RC200 to Dialer, as described in Chapter 1 of this
manual for any other telephone. Please note that, if you wish to add
names, you will be required to use the RC200 keypad.
To place a call, give the remote control a short press and wait for Dialer
to ask you for a name to call. To end the call, press the remote control
again.

Working with a PBX

There are situations where Dialer is not connected directly to a phone
line, but rather to a Private Branch eXchange (PBX). A good example
is a nursing home. To get an outside line, one usually needs to dial a
prefix digit, such as 9, and only then dial the actual number. If there is a
need to set a prefix digit for all the stored numbers (as when moving
from a private residence to a nursing home), do the following:
A. Pick up the handset. If names are stored, Dialer asks you
for a name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '8' key. Dialer will
now ask you to set the digit that will serve as the external
line access digit. Press the desired digit. To abort this
feature, press the star key (*).

Changing the spoken language

In order to change the language that Dialer uses, do the following:
A. Pick up the handset. If names are stored, Dialer asks you for
a name to call. Press the pound key (#).
B. Upon hearing the main menu, press the '0' key to enter the
language menu. Listen, and press the digit that represents
your desired language.

Chapter Three

[Type text]