Erasing A Single Name - Able-phone AP-5000 User Manual

6
your phone will continue to operate normally. The same applies
for a power outage.
2. If you are using a cordless phone, please verify that the sound
on the line is 'clean' with no 'white' noises. These 'white' noises,
usually occur when the mobile part of the cordless phone is far
from its base. Such noises can make it difficult for Dialer to
recognize names.
3. To access the main menu, once memory has at least one name
stored in it, do the following:
a. Pick up the handset.
b. After Dialer prompts you for a name to call, press the
pound key (#).
4. If you would like to dial a number manually, do the following:
a. Pick up the handset.
b. After Dialer prompts you for a name to call, press any of
the dialing keys except the pound key (#). Dialer will
connect you directly to the telephone line so that you can
dial manually.
5. Dialer is based on speaker-dependent voice-recognition
technology. This means that only the person who trained Dialer
can use it. However, two or more users can share Dialer. Each
user can store his/her own names and numbers, and then can
call them independently.
6. Dialer works only with the phone plugged into it, and not with
other phones on the same phone line. Dialer will recognize
names best if the phone used for training continues to be the
one used with Dialer. Substituting another phone for the one
used for training can lead to poor recognition results. Multiple
copies of Dialer can be used on the same phone line, each
working independently with the phone to which it is connected.

Erasing a single name

Erasing a single name from memory can be accomplished in two different
ways, as described below:
Method 1:
A. Pick up the handset. Dialer asks for a name to call. Press the
pound (#) key. The main menu will be played.
[Type text]