Notes On The Documentation; Symbols Used; Observe Other Applicable Documents; Storing Documents - Glow-worm SYSTEMPRO Instructions For Use Manual

INSTALLATION AND SERVICING
1

Notes on the documentation

1.1

Symbols used

The symbols used in the text are explained below:
Warning
Explanation
sign
i
Symbol that denotes useful tips and information
∙
Symbol for a required action
The warning notes are classifi ed in accordance with the severity
of the possible danger using the following warning signs and
signal words:
Warning Signal
sign word
a
Danger!
e
Danger!
a
Warning.
b
Caution.
1.2

Observe other applicable documents

∙ Observe absolutely all operating and installation instructions
enclosed with the product, for the various parts and
components of the system.
1.3

Storing documents

∙ Pass these installation instructions and all other applicable
documents and, if necessary, any required aids to the system
operator..
The operator will store the instructions and aids so that they are
available when required.
1.4

Applicability of the instructions

These installation instructions are only valid for boilers with the
following article numbers:
Product
SYSTEMPRO
EN
- 6 -
Explanation
Immediate danger to life or risk of
severe personal injury
Risk of death from electric shock
Risk of minor personal injury
Risk of material or environmental
damage
Type overview
Article number
0020128489
2

Safety

2.1

Basic safety instructions

∙ Before to read this chapter, also read the general safety advice
of the operating instructions.
2.1.1 Danger to life by electric shock
Touching live connections can cause serious personal injury.
∙ Before carrying out any work on the product, switch off the
power supply.
∙ Secure the power supply against being switched on again.
2.1.2 Danger to life due to missing or not properly
working safety devices
Missing safety devices can cause life-threatening scalding and
other injuries, for example by burst pipes.
The information contained in this document do not show all
schemes required for a professional installation of safety devices.
∙ Install the necessary safety devices in the system.
∙ Inform the user about the function and location of safety
devices.
∙ Never deactivate any safety device.
∙ Do not attempt to adjust them.
∙ Observe the relevant national and international laws,
standards and guidelines.
2.1.3 Danger due to improper use
Nonprofessional work on the product can cause damage to the
installation and as a consequence even personal injury.
∙ Only work on the product if you are a competent person.
2.1.4 Risk of material damage caused by unsuitable
tools
The use of unsuitable tools or improper use thereof may cause
damage, such as gas or water leaks.
∙ When tightening or loosening threaded connections, always
use suitable opened spanners, but do not use pipe wrenches,
extensions, etc.
0020148679_00 - 11/12 - Glow-worm