Servicing Note - Sony CDP-XE900 Service Manual

QQ
3 7 63 1515 0
HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH
TURNS OFF
Insert a screwdriver into the aperture of the unit bottom, and
move it in the direction of arrow.
TE
L 13942296513
www
.
http://www.xiaoyu163.com

SERVICING NOTE

x ao u163
y
i
http://www.xiaoyu163.com
SECTION 1
2 9
8
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-up
block. Therefore, when checking the laser diode emission, observe
from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION CHECK
Carry out the "S curve check" in "CD section adjustment" and check
that the S curve waveform is output two times.
Q Q
3 6 7 1 3 1 5
co
.
— 3 —
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9